Table of Contents
Advertisement
3) . . . . .Shows symbol diagram on the ladder.
+
Destination . . . . . . Indicates where data will be sent after operation.
Source . . . . . . . . . Stores data prior to operation.
4) . . . . .Indicates the type of processing that is performed by individual instructions.
5) . . . . .The details of conditions for the execution of individual instructions are as follows:
Symbol
No symbol
recorded
6) . . . . .Indicates the basic number of steps for individual instructions.
7) . . . . .The
8) . . . . .Indicates the page numbers where the individual instructions are explained.
2-4
2.2 How to Read Instruction Tables
S D
Indicates destination.
Indicates source.
Indicates instruction symbol.
Fig. 2.1 Shows Symbol Diagram on the Ladder
(D)+(S)
(D)
Indicates 16 bits.
Fig. 2.2 Type of Processing Performed by Individual Instructions
Instruction executed under normal circumstances, with no regard to the ON/OFF status of conditions prior to
the instruction.
If the precondition is OFF, the instruction will conduct OFF processing.
Executed during ON; instruction is executed only while the precondition is ON. If the preconditions is OFF,
the instruction is not executed, and no processing is conducted.
Executed once at ON; instruction executed only at leading edge when precondition goes from OFF to ON.
Following execution, instruction will not be executed and no processing conducted even if condition remains
ON.
Executed during OFF; instruction is executed only while the precondition is OFF. If the precondition is ON,
the instruction is not executed, and no processing is conducted.
Executed once at OFF; instruction executed only at trailing edge when precondition goes from ON to OFF.
Following execution, instruction will not be executed and no processing conducted even if condition remains
OFF.
See 3.6 for a description of the number of steps.
mark indicates instructions for which subset processing is possible.
See Section 3.3 for details on subset processing.
+
S1 S2
Indicates destination.
Indicates source.
Indicates instruction symbol.
(D+1, D)+(S+1, S)
Indicates
Indicates
16 bits.
16 bits.
D+1
Upper 16 bits
Execution Condition
D
(D+ 1,D)
Indicates 32 bits.
D
Lower 16 bits
Advertisement
Table of Contents
