Table of Contents
Advertisement
& Odometer
1
TRIP RESET switch
2
Combination meter
This meter displays the odometer when
the ignition switch is in the "ON" position.
The odometer shows the total distance
that the vehicle has been driven.
NOTE
If you press the TRIP RESET switch
when the ignition switch is in the
"LOCK"/"OFF" or "ACC" position, the
odometer/trip meter will light up.
The indicators will turn off when:
. The TRIP RESET switch is not oper-
ated for approximately 10 seconds.
. The driver's door is opened and then
closed.
& Double trip meter
1
TRIP RESET switch
2
Combination meter
This meter displays the two trip meters
when the ignition switch is in the "ON"
position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
The display can be switched as shown in
the following sequence by pressing the
TRIP RESET switch.
Meters and gauges
To reset the trip meter, select either the A
trip or B trip meter, then press and hold the
TRIP RESET switch.
CAUTION
To ensure safety, do not attempt to
change the function of the indicator
during driving, as an accident could
result.
NOTE
. If the connection between the com-
bination meter and battery is broken
for any reason such as vehicle
maintenance or fuse replacement,
the data recorded on the trip meter
will be lost.
. If you press the TRIP RESET switch
when the ignition switch is in the
"LOCK"/"OFF" or "ACC" position,
the odometer/trip meter will light up.
It is possible to switch between the A
trip meter and B trip meter indica-
tions while the odometer/trip meter
is lit up.
In addition, it is possible to reset the
trip meter by pressing and holding
the TRIP RESET switch.
The indicators will turn off when:
– The TRIP RESET switch is not
operated for approximately 10
– CONTINUED –
169
Advertisement
Chapters
Table of Contents
