Table of Contents
Advertisement
202
Center information display (CID)
about language settings, refer to
"General settings" �P210. For de-
tails about unit settings, refer to "Car
settings" �P215.
. The images displayed in this Own-
er's Manual are sample images. The
actual image may vary depending on
the region and vehicle specifica-
tions.
& Welcome screen
Welcome screen and Good-bye screen
are motion graphic displayed on the
combination meter display and center
information display upon entering and
exiting the vehicle.
When the driver's door is opened and
closed, the welcome screen will appear for
a short time.
NOTE
. The welcome screen will disappear
when the ignition switch is turned to
the "ON" position while the welcome
screen is shown.
. The welcome screen can be turned
on or off. For details, refer to "Gen-
eral settings" �P210.
. For a certain period of time after the
welcome screen has once appeared,
it may not appear again even when
the driver's door is opened and
closed. This does not indicate a
malfunction.
& Good-bye screen
The good-bye screen will be displayed
under the following conditions.
. The driver's door is opened after the
ignition switch is put in the "OFF"
position.
. 3 minutes have passed after the ignition
switch is put in the "OFF" position with
the driver's door closed.
. 10 minutes have passed when the
hands-free phone is used after the
ignition switch is put in the "OFF"
position.
. The battery voltage is low when the
ignition switch is put in the "OFF"
position.
& Interruption screen
Useful messages, such as reminders,
weather information (if equipped) and
traffic information (if equipped) may inter-
rupt the current screen and appear on the
display accompanied by a beep. Take the
proper action according to the message.
& Touch screen operations
The center information display has a touch
screen. Operations are performed by
touching the touch screen directly.
! Touch
Quickly touch and release once.
Advertisement
Chapters
Table of Contents
