Subaru Ascent 2023 Manual page 39

! Thigh extension (driver's seat – if
equipped)
CAUTION
When the thigh extension is pulled
out to its fullest, do not put weight on
the top of it. Doing so could break
the part.
The seat front length can be adjusted.
Pull up the lever "1" to adjust the length
and release the lever to lock it.
! Front passenger's seat
1 Seat position forward/backward con-
trol switch
To adjust the seat forward or backward,
move the control switch forward or
backward.
2 Seatback angle (reclining) control
switch
To adjust the angle of the seatback, move
the control switch.
! Power driver's seat with synchro-
nized outside mirrors memory
function (if equipped)
WARNING
. To avoid loss of vehicle control or
personal injury, never perform
the following operations while
Seats
driving.
– Adjusting the seat
– Selecting a registered seat
position
. Before adjusting the seat or se-
lecting a registered seat position,
make sure that cargo or the
hands and feet of rear seat pas-
sengers are clear of the adjusting
mechanism.
. The memory adjustment of the
seat position is finished. Be sure
to confirm that the select lever is
in the "P" position, and the park-
ing brake is applied, when adjust-
ing the seat position. Do not drive
until the utilizing of the seat
position is complete.
. When any unusual conditions or
malfunctions occur during the
memory adjustment of the seat
position, stop the memory ad-
justment of the seat position by
performing any of the following
procedures.
– Operate any of the power seat
switches.
– Press the "SET" button.
– Press button "1" or "2".
– Operate the outside mirror
– CONTINUED –
35