Table of Contents
Advertisement
222
Center information display (CID)
NOTE
A maximum of 5 birthdays can be
stored.
! Anniversary List
The procedure for setting an anniversary is
the same as "Birthday List" �P221, except
that in step 4 "Anniversary List" is selected.
! Driver Monitoring System (if
equipped)
The Driver Monitoring System settings can
be changed.
For setting method for the following menu
on the Driver Monitoring System, refer to
"ON/OFF setting" �P220.
. Driver Monitoring System
. User Recognition
. Automatically Retract Seat on Entry
Repeat Facial Scan:
1. Touch
(HOME).
2. ?
(Settings)
3. ? "Car"
4. ? "Driver Monitoring System"
5. ? "Repeat Facial Scan"
6. ? "OK"
7. While seated in the driver's seat, face
forward and wait for a few moments.
When the scan is completed, the
completion screen is displayed on the
combination meter (color LCD).
Register User:
1. Adjust the seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle so that you are seated in
the correct driving posture.
NOTE
. Start the user registration after ad-
justing the seat position, outside
mirror angle, and reverse tilt-down
outside mirror angle. If they are
adjusted during user registration, it
may be disrupted.
Refer to "Power seat" �P34 or "Out-
side mirrors" �P269.
. If the ignition switch is turned to the
"OFF" position before user registra-
tion is complete, the information of
the adjusted seat position, outside
mirror angles, and reverse tilt-down
outside mirror angle will not be
saved.
2. Touch
(HOME).
3. ?
(Settings)
4. ? "Car"
5. ? "Driver Monitoring System"
6. ? "Register User"
Advertisement
Chapters
Table of Contents
