Subaru Ascent 2023 Manual page 329

is not a malfunction.
– Vehicle surroundings are dark
(such as at night).
– Ambient temperature outside the
vehicle is high or low.
– There is water or humidity on the
lens (such as in rainy weather).
– There is foreign material (such as
mud) on or near the camera.
– Sunlight or a headlight beam
shines directly shines toward
the camera lens.
. Under an artificial light such as a
fluorescent lamp, sodium-vapor
lamp or mercury lamp, the lighted
portion may appear to flicker (flicker
phenomenon).
. When the display is cold, the image
may leave traces or become darker
than usual, causing a difficulty in
viewing the screen. When driving
your vehicle, make sure that you
check your surroundings directly for
traffic.
. The following conditions may affect
the appearance of the screen, but
any resulting image distortion on the
screen does not indicate a malfunc-
tion.
– When humidity is high on a rainy
day, the camera lens becomes
foggy.
– When driving at night, the light
from a vehicle or building located
ahead shines in the direction of
the camera.
– When the vehicle is in a dark
place or when driving at night, the
camera image may be adjusted to
make image noise less visible.
Therefore, the image may look like a
monochromatic image or the image
colors may differ from the actual col-
ors. The image sharpness in the center
and in the four corners of the screen
may differ. This is not a malfunction.
! 3D view
1 Vehicle icon
2 Vehicle angle icon
Surround View Monitor
The 3D view displays the area around the
vehicle.
! Top view
1 Vehicle icon
2 Predicted course line*
*: When the select lever is in the "R" position.
The top view displays an image of the
vehicle's surroundings from above the
vehicle. This view is useful for checking
the vehicle's surroundings when you are
driving.
– CONTINUED –
325