Subaru Ascent 2023 Manual page 267

! HomeLink set up
1 HomeLink buttons
2 Left button
3 Center button
4 Right button
Press any of the left, center or right buttons
to display the main menu. Select
HomeLink menu using the left button or
press any of the HomeLink buttons.
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the "P" position.
1. Select "SET UP" using the right button.
2. Select "Continue" using the HomeLink
left button.
3. Press any of the HomeLink buttons.
4. Be sure to read the displayed instruc-
tions.
Select "Continue" using the HomeLink
left button.
5. Position the hand-held remote (garage
door opener remote) 2 in (5 cm) away
from the mirror.
Mirrors
1 Garage door opener remote
6. While the HomeLink programming in-
structions are displayed, press and
hold the hand-held remote button.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 in (15 to
30 cm). Keep this in mind if you have
difficulty with the programming pro-
cess.
7. Be sure your garage door is not
moving, then press OK.
8. Firmly press the HomeLink left button 3
times.
At this point, your device should
operate when the HomeLink button is
– CONTINUED –
263