Installing A Booster Seat Or Booster Cushion - Subaru Ascent 2023 Manual

& Installing a booster seat or
booster cushion
Booster seat
Booster cushion
WARNING
Before installing a booster seat/
cushion, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. If the seat is equipped with a slide
mechanism, set the seat as far back as
possible.
2. Adjust the head restraint as follows.
For booster seat:
Raise the head restraint to the extended
position. If the booster seat still makes
contact, remove the head restraint. For
details, refer to "Head restraints" �P47.
Child restraint systems
CAUTION
Store the head restraint that has
been removed in the cargo area. Do
not place the head restraint in the
passenger compartment to prevent
it from being thrown around in the
passenger compartment in a sud-
den stop or a sharp turn.
For booster cushion:
Raise the head restraint to the extended
position. Do not remove the head restraint.
3. Place the booster seat/cushion in the
rear seating position and sit the child
on it. The child should sit well back on
the booster seat/cushion.
4. If there is a gap between the child
restraint system and the seatback,
– CONTINUED –
75