Subaru Ascent 2023 Manual page 42

Hide thumbs Also See for Ascent 2023:
Table of Contents

Advertisement

38
Seats
NOTE
. The outside mirror angle will return
to its original position approxi-
mately 9 seconds after the select
lever is moved to any position other
than "R" position.
. The factory setting (default setting)
for this function is set as the front
passenger's side mirror. The setting
of the driver's side mirror operation
can be changed by a SUBARU deal-
er. Contact your SUBARU dealer for
details.
. The system stores the adjusted
mirror angle for approximately 45
seconds after the ignition switch is
turned to the "OFF" position. Regis-
ter the mirror angle while the mem-
ory function is available.
! Utilizing of memory position
registered with button "1" or "2"
WARNING
Be sure to press the correct button
to retrieve your registered memory
position. If the seat position is not
optimum for you, it may adversely
affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
involving serious injury or death.
1. Turn the ignition switch to the "ON"
position.
2. Put the select lever is in the "P" position
and apply the parking brake. Then
press button "1" or "2".
A chirp will sound and the seat and angle
of the outside mirrors moves to the
registered position.
When the select lever is moved to the "R"
position, the outside mirror will move to the
registered reverse tilt-down position.
NOTE
. If the vehicle battery is removed, the
registered memory position data will
not be deleted.
. When the button "1" or "2" is
pressed within 45 seconds after the
driver's door is opened, the regis-
tered memory position can be re-
trieved even if the ignition switch is
in the "LOCK" or "OFF" position.
. If buttons "1" and "2" are pressed at
the same time, execution of seat
position retrieval may not be possi-
ble.
. When the retrieved position is the
same as the current seat position, a
chirp will sound twice.
! Utilizing of the seat position
registered with access key fob
1. Hold the registered access key fob.
2. Unlock the driver's door by pressing
the " " button or gripping the door

Advertisement

Table of Contents
loading

Table of Contents