Table of Contents
Advertisement
& ECO gauge
The ECO gauge shows the difference
between the current rate of fuel consump-
tion and the average rate of fuel consump-
tion since the trip meter was last reset.
If the ECO gauge moves towards the right
side, this indicates better fuel efficiency.
NOTE
. The ECO gauge shows only an
approximate indication of fuel effi-
ciency.
. After resetting the trip meter, the
average rate of fuel consumption is
not shown until you have driven for 1
mile (or 1 km). Before that time, the
ECO gauge does not operate.
& Combination meter settings
Meter settings can be set on the center
information display. For details, perform
the procedures described in "General
settings" �P210.
Illumination brightness control
3-5. Illumination brightness
control
The illumination brightness of the combi-
nation meter and center information dis-
play dims under the following conditions.
. The light switch is in the "
position when the ambient light is dark.
. The light control switch is in the "AUTO"
position and the headlights illuminate
automatically.
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
– CONTINUED –
171
" or "
"
Advertisement
Chapters
Table of Contents
