Emerson Rosemount 3051CF Series Reference Manual page 48

Configuration
July 2020
The screen shown in
display beyond those defined in Basic Configuration. Configuration fields for Parameters 2,
3, and 4 are provided but not shown in the image.
Note
You can configure the LCD display to display a mix of basic and advanced parameters.
2.9.5 Mode
Note
Each block has modes. For block oriented user interfaces, you must manage modes
individually in each block.
Menu navigation: Configure → Manual Setup → Classic View → Mode Summary
F
OUNDATION
service mode, for example, other blocks linked to it may not function as anticipated. The
Rosemount 3051 DD's and DTM's have automated procedures that manage transducer,
resource, and analog input block modes, placing them out of service to allow
configuration, then returning them to auto mode when the configuration task is
completed or canceled. If you complete tasks with manual procedures, you are
responsible for managing modes.
The Mode Summary function displays the active mode for all resource and transducer
blocks, and allows you to change modes of those blocks individually or collectively. This is
most frequently used to return all to service. You can manage analog input modes from
the Analog Input Block Configuration screens or from the control host.
Figure 2-19: Mode Summary Screen
48
Figure 2-18 above provides the capability to define parameters for
™
Fieldbus blocks have modes. Modes propagate, so if a block is in out-of-
Reference Manual
00809-0100-4774
Rosemount 3051