Emerson Rosemount 3051CF Series Reference Manual page 46

Configuration
July 2020
The Scale Gauges button shown in
called a method which allows you to change the scaling on the gauge.
2.9.4 Local display (LCD display)
Note
Set up the local display in the LCD display transducer block. For block oriented user
interfaces, perform local display configuration in the LCD display transducer block.
Menu navigation: Configure → Manual Setup → Display
The local display can be configured using guided setup or manual setup.
Basic display setup
Basic display setup provides a check - the - box way for the user to configure up to four
parameters to display on the LCD display. These parameters are displayed on a rotating
basis.
Procedure
1. Check the box next to each parameter the LCD display should display.
2. If you select Scaled Output, use the Pressure Scaled Unit dropdown menu to select
46
Figure 2-16: Overview Screen
units.
Figure 2-16 above starts an automated procedure
Reference Manual
00809-0100-4774
Rosemount 3051