Emerson Rosemount 3051CF Series Reference Manual page 19

Reference Manual
00809-0100-4774
Guided setup with automated task procedures (methods)
Guided setup provides automated task procedures for tasks which require multiple steps
to perform. Guided setup also provides notification of recommended actions, such as
suggesting the device user contact control room personnel to have the process loop
placed in manual mode prior to configuration.
Guided setup generally proceeds in three stages. The first is preparation. In this stage, the
device gives user notifications and and performs steps neede3d to prepare the device for
task setup. The second is task execution where the task is performed in a series of steps.
Sometimes the number and sequence of steps is changed based on the values or
parameters selected. This eliminates your need to understand and track how each
configuration choice may influence what can be done in succeeding steps. The third task is
post-setup processing. In this step, the device returns to operation or gracefully cancels a
task.
Guided setup handles mode management as part of preparation and post processing. This
means blocks that must be placed in manual or out of service mode for configuration will
be placed in those modes and upon completion of the configuration task, will return those
blocks to the normal operating mode.
Guided setup helps you complete tasks with the highest probability of success and
gracefully terminate partially completed tasks by returning device parameters to the
values that existed before the terminated task was started. If you are not very familiar with
a device, consider using guided configuration.
Manual setup with manual and automated task procedures
If you are familiar with the mode changes and configuration steps needed to complete a
task and properly return the device to service, you can use manual setup. You can also use
manual setup used when you need to change a single parameter and don't want to
execute the full sequence of steps that are part of guided configuration.
You can sometimes complete manual setup in less time than guided setup; however,
manual setup doesn't provide the comprehensive guidance or graceful task termination of
guided setup. If you are very familiar with tasks and wish to perform them in the least
time, consider using manual setup.
2.2.9 Classic view
Classic view provides an alternate way to view parameters and perform manual setup. In
the classic view, the individual screens used for manual setup are replaced by a single
scrollable list of parameters. The classic view reduces screen to screen navigation to a
minimum, but requires that you know all the parameters which need to be used and the
order of those parameters to perform each task. You also need to know how to manage
modes, both to perform tasks and to return devices to operation.
Expert users will use classic view to review all block parameters, and to perform some
configuration or service tasks. Emerson does not recommend classic view to anyone who
is not a device and F
Reference Manual
™
Fieldbus expert.
OUNDATION
Configuration
July 2020
19