Device Configuration - Omron V330-F Series Connection Manual

5.2. Device Configuration

The system components required for reproducing the connection procedures described in this
document are as follows.
• Configuration with V330-F
NX1P2-9024DT
PC
(Built-in EtherNet/IP Port)
(Windows 10,
with Sysmac
Studio installed)
Manufacturer
OMRON NX Series CPU Unit
(Built-in EtherNet/IP Port)
OMRON Power Supply Unit
OMRON Switching hub
OMRON Sysmac Studio
OMRON Sysmac Studio Project File
--- PC (OS: Windows 10)
--- LAN cable (STP (shielded, twisted-
pair) cable of Ethernet category 5
or higher)
OMRON Code reader
OMRON Power over Ethernet (PoE) single
port injector
--- 24 VDC power supply
5. Applicable Devices and Device Configuration
Switching hub
W4S1-05C
LAN cable
24 VDC power supply
Name
LAN cable
(Connect to
PoE injector
input side)
Model
NX1P2-9024DT
NJ-PA3001
W4S1-05C
SYSMAC-SE2□□□
OMRON_V330_NX_EIP_
V100.csm2
---
V330-F064N12M-NNX
Select one that can be
powered via Ethernet.
---
V330-F064N12M-NNX
LAN cable
(Connect to output side)
Version
Ver. 1.16
Ver. 1.28
Ver. 1.00
Ver. 2.1.0
---
8