5. Applicable Devices and Device Configuration
Precautions for Correct Use
Ensure that the Sysmac Studio is updated to the version specified in this documentation, or
to a higher version.
If you use a version other than the version specified in this section, there may be differences
in the procedures in Section 7 and later. In that case, refer to the Sysmac Studio Version 1
Operation Manual (Cat. No. W504) to perform the equivalent procedures.
Note
Refer to the Industrial Switching Hub W4S1 Series User Manual (0969584-7) for power
supply specifications that can be used for 24 VDC power supply (for the switching hub).
Note
Refer to the MicroHAWK V320-F/V330-F/V420-F/V430-F Series Barcode Reader User
Manual (Cat. No. Z432) for the power supply specifications that can be used for 24 VDC
power supply (for the code reader).
10