13
Double-click Configurations
and Setup – Task Settings in
the Multiview Explorer.
The Task Settings Tab Page is
displayed in the Edit Pane.
Click on VAR.
14
Click on +.
The new area is added.
Click on the down arrow in the
Variable to be refreshed field
for the added area (on the left
side of the tab page).
The variables set in this section
are displayed.
Select EIPOutput.
S_EIPOutput197 is added.
* Data Type is automatically set.
No value needs to be entered.
15
Using the same procedure as in
step 6, add all the variables set
in this section to Variable to be
refreshed (on the left side of
the tab page).
* Data Type is automatically set.
No value needs to be entered.
7. EtherNet/IP Connection Procedure
35