Omron V330-F Series Connection Manual page 32

7.3.4. Setting the Global Variables
Set the global variables to use for the tag data links.
An example of using the following assemblies is shown here.
• Input Assembly: 1 Decode Input Assembly (103)
• Output Assembly: Output Assembly (197)
1
Double-click Data Types under
Programming – Data in the
Multiview Explorer.
2
The Data Types Tab Page is
displayed.
Click on Structures. The
Structures Tab Page appears.
Click in the Name field to enter
a new data type.
In the Name field, enter
Device_status.
3
After confirming the entry, right-
click in the field and select
Create New Member from the
menu.
7. EtherNet/IP Connection Procedure
31