Omron V330-F Series Connection Manual page 34

7
In Name and Base Type, enter
the name and data type of each
signal as shown in the figure on
the right.
For a detailed explanation of the
data shown in the figure on the
right, refer to Appendices A-2
EtherNet/IP Specifications in the
Autofocus Multicode Reader
MicroHAWK V320-F/V330-
F/V420-F/V430-F Series User
Manual for Communication
Settings (Cat. No. Z407).
8
As in steps 5 to 7, create new
data types and members.
Here, we create data types for
the Output Assembly to control
the code reader, such as trigger
input bits.
Assign also the byte offset and
bit offset values in Offset Byte
and Offset Bit as shown in the
figure.
For a detailed explanation of the
signals shown in the figure on
the right, refer to Appendices A-
2 EtherNet/IP Specifications in
the Autofocus Multicode Reader
MicroHAWK V320-F/V330-
F/V420-F/V430-F Series User
Manual for Communication
Settings (Cat. No. Z407).
7. EtherNet/IP Connection Procedure
33