Omron V330-F Series Connection Manual page 39

7.3.6. Setting Up the Connections
Set the target variables (the side on which connections are to be established) and the
originator variables (the side on which you want to establish connections) to add connections,
and then set up the connections (in the tag data link table).
1
In the Built-in EtherNet/IP Port
Settings Connection Settings
Tab Page, select Connection.
2
Right-click in Connection and
select Add from the menu.
3
You can now enter a new
connection. Select the newly
added Input Area.
From the Target Device pull-
down menu, select
192.168.188.2.
4
A new connection named
default_001 is created.
In the Connection I/O Type
field, select Input 1 Decode.
5
You can now set the Target
Variable and Originator
Variable fields.
7. EtherNet/IP Connection Procedure
38