Omron V330-F Series Connection Manual page 43
Auto focus multi code reader
Hide thumbs
Also See for V330-F Series:
- Connection manual (82 pages) ,
- Quick start manual (72 pages) ,
- Network connection manual (46 pages)
Table of Contents
Advertisement
11
Select Synchronization from
the Controller Menu.
12
The Synchronization Dialog
Box is displayed.
Confirm that the data to transfer
is selected. (In the figure on the
right, the check box for NX1P2
is selected.)
Clear the check box for Do not
transfer the EtherNet/IP
connection settings (i.e., tag
data link settings).
Click the Transfer to
Controller Button.
* Executing Transfer to
Controller transfers the data
from the Sysmac Studio to the
controller for data comparison.
13
A confirmation dialog box
appears. Confirm that there is
no problem and click the Yes
Button.
The Synchronizing Dialog Box
appears.
Another confirmation dialog box
appears. Confirm that there is
no problem and click the No
Button.
* Do not return to Run Mode
yet.
7. EtherNet/IP Connection Procedure
42
Advertisement
Table of Contents
