Omron V330-F Series Connection Manual page 33
Auto focus multi code reader
Hide thumbs
Also See for V330-F Series:
- Connection manual (82 pages) ,
- Quick start manual (72 pages) ,
- Network connection manual (46 pages)
Table of Contents
Advertisement
4
Create a data type to check the
Status Signal details of the Input
Assembly.
In Name and Base Type, enter
the name and data type of each
signal as shown in the figure on
the right.
Assign also the byte offset and
bit offset values in Offset Byte
and Offset Bit as shown in the
figure.
Device_status:
For a detailed explanation of the
data shown in the figure on the
right, refer to Appendices A-2
EtherNet/IP Specifications in the
Autofocus Multicode Reader
MicroHAWK V320-F/V330-
F/V420-F/V430-F Series User
Manual for Communication
Settings (Cat. No. Z407).
5
Right-click in the tab page and
select Create New Data Type.
In the Name field, enter
S_EIPInput103.
6
After confirming the entry, right-
click in the field and select
Create New Member from the
menu.
7. EtherNet/IP Connection Procedure
32
Advertisement
Table of Contents
