Omron V330-F Series Connection Manual page 14

Name of data type
S_EIPInput103
INFO_BITS
RESERVED1
RESERVED2
RESERVED3
DEVICE_STATUS
FAULT CODE
COUNTERS
READ_CYCLE_
REPORT
DECODE_CYCLE_
REPORT
CODE_TYPE
PIXELS_PER_
ELEMENT
DECODE_LENGTH
DECODE_DATA
*1. The original data type is defined as "SINT". In this document, it is defined as "BYTE" that can be
displayed in "ASCII" for readability when monitoring with the Watch Tab Page of Sysmac Studio.
■ Definition of Status Signal area access data types (structure)
Data types for accessing the Status Signal area.
Name of data type
Device_Status
Run_Mode
Trigger_Acknowledge
Exposure_Done
Output3_Status
Buffer_Overflow
Reserved
Note
Please refer to Appendices A-2 EtherNet/IP Specifications in the Autofocus Multicode
Reader MicroHAWK V320-F/V330-F/V420-F/V430-F Series User Manual for Communication
Settings (Cat. No. Z407) for a description of how to use each bit.
Data type
---
STRUCT
BYTE INFO BIT
BYTE Reserved for future use
BYTE
Reserved for future use
BYTE Reserved for future use
Device_Status Status Signal (32 bits)
DINT Error code
ARRAY[0..5]
Read Count Information
OF DINT
ARRAY[0..3]
Read Cycle Report
OF INT
ARRAY[0..3]
Decode Cycle Report
OF DINT
DINT Read Symbol Type
REAL
Read Symbol PPE Size
DINT Decoded String Length
ARRAY[0..435]
Decoded String
OF BYTE *1
Data type
ARRAY[0.31]
OF BOOL
BOOL Run Mode
BOOL Accept trigger
BOOL Exposure Done
Omitted
BOOL Output3 Status
Buffer Overflow
BOOL
ARRAY Reserved for future use
[0..9] OF
BOOL
6. EtherNet/IP Settings
Code reader data
Code reader data
---
13