Omron V330-F Series Connection Manual page 47

7.4.2. Checking the Sent and Received Data
Check that the correct data is sent and received.
To do so, place a readable code symbol in the code reader's field of view in advance.
If you change variable values online in the Watch Tab Page, the devices
connected to Output Units may operate regardless of the operating mode of
the CPU Unit.
Sufficiently confirm safety before you change the values of variables on a
Watch Tab Page when the Sysmac Studio is online with the CPU Unit.
1
Select Watch Tab Page from the
View Menu.
2
Select Watch Tab Page 1.
3
Click on Input Name and enter the
Name of the variable to monitor.
To set a new variable name, enter
the following variable name.
EIPOutput.COMMANDS.Trigger
EIPInput
4
For
EIPOutput.COMMANDS.Trigger,
change the value in the Modify field
to TRUE.
Press the Enter Key and confirm
that Online value for
EIPOutput.COMMANDS.Trigger is
True.
7. EtherNet/IP Connection Procedure
46