Omron V330-F Series Connection Manual page 23
Auto focus multi code reader
Hide thumbs
Also See for V330-F Series:
- Connection manual (82 pages) ,
- Quick start manual (72 pages) ,
- Network connection manual (46 pages)
Table of Contents
Advertisement
11
The Advanced Settings Screen
appears.
Check the settings shown in the
red frames.
EtherNet/IP connection is
Enabled by default, so you do
not need to change the settings
with the default setting.
If you need to change the IP
address, for example when
connecting multiple code
readers, change the IP
Address and subsequent
settings as necessary.
12
Click on the Flash Icon shown in
the red frame to save the
settings to the code reader.
7. EtherNet/IP Connection Procedure
22
Advertisement
Table of Contents
