Omron V330-F Series Connection Manual page 42

7
Select Communications Setup
from the Controller Menu.
8
The Communications Setup
Dialog Box is displayed.
Make sure that the Ethernet
connection via a hub option is
selected in Connection type.
Also, enter 192.168.188.200 in
Remote IP Address.
Click on Ethernet
Communications Test and
confirm that Communications
test OK is displayed.
Click OK.
9
Select Online from the
Controller Menu.
A confirmation dialog box
appears. Confirm the
information and click Yes.
* The dialog box displayed
differs depending on the status
of the controller being used.
Read the information and
select Yes or No to proceed
with the operation.
10
When you are online, a yellow
frame appears in the upper part
of the Edit Pane.
Note
Refer to Section 6 Online Connections to a Controller in the Sysmac Studio Version 1
Operation Manual (Cat. No. W504) for details on online connection to the controller.
7. EtherNet/IP Connection Procedure
41