Omron V330-F Series Connection Manual page 41

7.3.7. Transferring the Project Data
Place the Sysmac Studio online and transfer the connection settings and project data to the
controller.
When you transfer a user program, Configurations and Setup data, device
variables, or memory values for CX Units from the Sysmac Studio, the devices
and machines may operate unexpectedly regardless of the operating mode of
the CPU Unit.
Before transferring the project data, check the safety of the destination slaves.
1
Turn ON the power supply to
the controller, switching hub,
and code reader.
2
Select Check All Programs
from the Project Menu.
3
The Build Tab Page is
displayed.
Confirm that 0 is shown for both
Errors and Warnings.
4
Select Rebuild Controller from
the Project Menu.
5
A confirmation dialog box
appears. Confirm the
information and click the Yes
Button.
6
In the Build Tab Page, confirm
that 0 is shown for both Errors
and Warnings.
7. EtherNet/IP Connection Procedure
40