I Memory Name Indication - Icom ID-1 Instruction Manual

I Memory name indication

During memory mode operation, the programmed memory
name can be displayed instead of the programmed frequency
for your preference.
D D Selecting from the application
q Click [V/M] to select memory mode, if necessary.
• "MEMO" appears.
w Click [MN] to show the programmed memory name.
• "MN" appears.
• When no memory name is programmed, the programmed fre-
quency is displayed.
e To cancel the indication, click [MN] again.
Toggles indication with [MN].
D D Selecting with the RC-24
q Push [V/M] to select memory mode.
w Select the desired memory channel with [DIAL] or keypad.
ePush [MN•9] momentarily to toggle the indication between
programmed memory name and frequency.
• " " or "
name indication or frequency indication is selected, respectively.
[MN•9]
Click
MEMORY/CALL OPERATION
" displayed for a while when memory
LOW
Selected with [MN•9].
LOW
10
10
82