I Cpu Reset - Icom ID-1 Instruction Manual

I CPU reset

The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
IMPORTANT!:
Resetting the transceiver CLEARS all memory information
and initializes all values in the transceiver.
D D Resetting from the application
qSelect "Transceiver Initialization(N)" in the File menu; or
while pressing and holding [Ctrl], press [N] key on the PC
keyboard.
• A confirmation dialog appears.
w Click [OK] to reset the CPU.
OTHER FUNCTIONS
D D Resetting from the RC-24
➥ While pushing and holding [V/M] and [CALL], turn power
ON.
• "
condition.
[PWR]
[CALL]
[V/M]
14
" displayed then shows the initial
14
112