Driver Installation; I Microsoft Windows Xp - Icom ID-1 Instruction Manual

The displayed dialog boxes or indications may differ
slightly from the following instructions according to your
system conditions, or environment.
I Microsoft
®
Windows
q Connect the ID-1 to the desired USB port.
• Push [POWER] to turn the power ON.
• "Found New Hardware" appears as below.

DRIVER INSTALLATION

®
XP
wThe "Found New Hardware Wizard" will come up as below.
Insert the supplied CD into the CD drive, select "Install the
software automatically (Recommended)," then click
[Next>].
Select
Click
3
2
3
18