Icom ID-1 Instruction Manual page 4

Digital transceiver
Hide thumbs Also See for ID-1:
Table of Contents

Advertisement

PRECAUTION
DO NOT
push the PTT when not actually desiring to transmit.
DO NOT
allow children to play with any radio equipment con-
taining a transmitter.
During mobile operation,
without running the vehicle's engine. When the transceiver's
power is ON and your vehicle's engine is OFF, the vehicle's bat-
tery will soon become exhausted.
BE CAREFUL!
erating it continuously for long periods.
AVOID
using or placing the transceiver in direct sunlight or in
areas with temperatures below –10°C (+14˚F) or above +60°C
(+140˚F).
AVOID
the use of chemical agents such as benzine or alcohol
when cleaning, as they can damage the transceiver's surfaces.
USE
Icom microphones only (supplied or optional). Other man-
ufacturer's microphones have different pin assignments and may
damage the transceiver if attached.
DO NOT use the supplied CD for any other devices.
The CD is for the ID-1 only.
iii
DO NOT
operate the transceiver
The transceiver will become hot when op-
If a connection cable is disconnected or has a loose connec-
tion during operation, an error may occur. Connect the con-
nectors correctly, and DO NOT touch the connectors during
operation.
For the operation of PC and peripheral devices, follow the in-
structions provided in the manuals which come with the PC
and peripheral devices.
This device may cause signal interference when used in a do-
mestic setting. When interference occurs, move this unit as
far as possible away from the affected device.
All copyrights associated with this manual and all intellectual
property rights associated with the hardware and software of
the ID-1 are held by Icom Inc.
Unauthorized reproduction or transmission of this manual, or
any part hereof, is prohibited.
The content of this manual, the hardware and software asso-
ciated with the ID-1, and the appearance of the ID-1 are all
subject to change without notice.
For U.S.A. only
CAUTION:
Changes or modifications to this device, not ex-
pressly approved by Icom Inc., could void your authority to
operate this device under FCC regulations.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents