Icom ID-1 Instruction Manual page 105

D D Setting from the RC-24
qSet the desired operating frequency and mode (FM or Dig-
ital voice).
• Using the CTCSS— in FM mode
w Push [TXinh•
] for 0.5 sec. to enter set mode.
ePush [MODE] or [TXinh•
" " item.
[TXinh• ]
[MODE]
r Rotate [DIAL] to select the desired tone squelch frequency.
• After the selection, push [PWR] momentarily to exit set mode.
tPush [TONE•
•5] once or twice to turn the tone squelch
function ON.
• " " appear.
yWhen a signal with matched tone is received, the squelch
opens and emits received signal.
• When the received signal includes an unmatched tone, the
squelch does not open. However, the S/RF indicator shows the
received signal strength.
u Push [PTT] to answer.
POCKET BEEP AND TONE/DIGITAL SQUELCH
] several times to select
iPush [TONE•
•5] once to cancel the tone squelch func-
tion.
• " " disappears.
• Using the digital code squelch— in Digital voice mode
w Push [TXinh•
] for 0.5 sec. to enter set mode.
ePush [MODE] or [TXinh•
" " item.
r Rotate [DIAL] to select the desired code number.
• After the selection, push [PWR] momentarily to exit set mode.
tPush [TONE•
•5] several times "
the digital code squelch function ON.
yWhen a signal with matched digital code is received, the
squelch opens and emits received signal.
• When the received signal includes an unmatched code, the
squelch does not open. However, the S/RF indicator shows the
received signal strength.
u Push [PTT] to answer.
• When the called station call sign is not selected in "UR," push
[CS• •1] for 0.5 sec. to display receive call sign indication
mode then push [SQL] for 0.5 sec. to set the call sign before
pushing [PTT].
13
] several times to select
" appears to turn
13
98