Icom ID-1 Instruction Manual page 14

1
PANEL DESCRIPTION
D D Memory channel list screen
q w
q CHANNEL SELECT
Select the memory channel for operation by double click-
ing and select "Move to this channel".
"+" appears when the channel is selected.
w PROGRAMMED FREQUENCY
Enter the desired operating frequency.
Select the desired frequency cell, then enter the desired
frequency from the PC's keyboard directly.
e OPERATING MODE
To select the desired operating mode, double click the
mode cell. Then click to select the desired operating mode,
FM, DV (Digital Voice) or DD (Data mode).
7
e r t y u
r REPEATER
Select the desired shift direction for repeater operation
from RP–, RP+, RPS and Simplex in RP cell, and enter the
desired offset frequency via the PC's keyboard within 0 to
60 MHz range in Offset Freq. cell.
RP– : Negative shift
RP+ : Positive shift
RPS : For repeater operation in DD mode
t TONE/TSQL
Select the desired tone function from TONE, TSQL and
OFF in Tone Select cell, and select the desired tone fre-
quency for each Repeater Tone and TSQL Tone from the
list appeared by double clicking the cell.
TONE : Repeater tone ON
TSQL : Tone squelch ON
i o