14Other Functions; I Set Mode - Icom ID-1 Instruction Manual

I Set mode

D D Set mode operation with the application
qSelect "Edit Set Mode(C)..." in View menu, click " " in tool
bar or press [F7] key on the PC keyboard.
• Set Mode screen appears.
wDouble click the desired item, then select or enter the de-
sired value or condition.
eTo close the Set Mode screen, click " " in tool bar, click
" " or press [F7] key.
OTHER FUNCTIONS
D D Set mode operation with the RC-24
q Push [TXinh•
] for 0.5 sec.
w Push [MODE] or [TXinh•
e Rotate [DIAL] to select the desired value or condition.
r To exit set mode, push [PWR] momentarily.
D D Offset Freq.
(
Sets the duplex offset frequency within 0 to 60 MHz range.
During duplex (repeater) operation, transmit frequency shifts
the set frequency.
(default value may differ depending on versions)
14
] to select the desired item.
)
13
14
100