Icom ID-1 Instruction Manual page 102

13
POCKET BEEP AND TONE/DIGITAL SQUELCH
• Using the call sign squelch— in Digital voice mode
wPush [CS•
•1] 4 times ("
to select the desired call sign.
[CS• •1]
ePush [CS•
•1] again to exit call sign selecting condition.
rPush [TONE•
appear to turn the pocket beep function ON.
tWhen a signal with matched call sign is received the trans-
ceiver emits beep tones and " " indicator blinks.
y Push [PTT] to answer.
• " " indicator disappears.
• When the called station's call sign is not selected in "UR," push
[CS• •1] for 0.5 sec. to display receive call sign indication
mode then click [SQL] for 0.5 sec. to set the call sign before
pushing [PTT].
uPush [TONE•
function.
• " " disappears.
95
" selection), then rotate dial
LOW
•5] several times until " " and "
•5] once to cancel the call sign squelch
"