Icom ID-1 Instruction Manual page 100

13
POCKET BEEP AND TONE/DIGITAL SQUELCH
• Using the digital code squelch— in Digital voice mode
w Displays the Set Mode screen.
eDouble click the "Digital Code" cell, then enter the desired
code number within 00 to 99.
rClick [DSQL] several times until "CBEEP" appears to turn
the pocket beep function ON.
t When a signal with matched digital code is received;
- The transceiver emits beep tones.
- Shows "CBEEP" and "
y Push [PTT] to answer.
• The pocket beep function is cancelled and the digital code
squelch operation is selected automatically.
• "CSQL" indication appears instead of "CBEEP."
• When the called station call sign is not selected in "YOUR" (in
Select Call Sign screen), click [CD] to display Received Call
Record screen, select the call then click [Select] to set the call
sign before pushing [PTT].
uClick [DSQL] several times to cancel the digital code
squelch function.
• "CSQL" indication disappears.
93
Enter the desired
code number.
" indications alternately.
CBEEP
• Using the call sign squelch— in Digital voice mode
w Click [CS] to display Select Call Sign screen.
e Select or enter the desired call sign in "MY."
• After the setting, click [OK].
Select/enter the desired call sign.
rClick [DSQL] several times until "DBEEP" appears to turn
the pocket beep function ON.
t When the signal with matched call sign is received;
- The transceiver emits beep tones.
- Shows "DBEEP" and "
DBEEP
y Push [PTT] to answer.
• The pocket beep function is cancelled and the call sign squelch
operation is selected automatically.
• "DSQL" indication appears instead of "DBEEP."
• When the called station call sign is not selected in "YOUR" (in
Select Call Sign screen), click [CD] to display Received Call
Record screen, select the call then click [Select] to set the call
sign before pushing [PTT].
uClick [DSQL] several times to cancel the call sign squelch
function.
• "DSQL" indication disappears.
" indications alternately.