I Power Supply Connections - Icom ID-1 Instruction Manual

2
INSTALLATION AND CONNECTIONS

I Power supply connections

CAUTION:
Before connecting the DC power cable,
check the following important items. Make sure:
• The [POWER] switch is OFF.
• Output voltage of the power source is 12–15 V when you
use a power supply.
• DC power cable polarity is correct.
: positive + terminal
Red
: negative _ terminal
Black
Use a DC power supply with a 10 A capacity and above when
operating the transceiver with AC power. Refer to the dia-
grams below.
• Connecting to a DC power supply
ID-1
15
DC power
supply 13.8 V
AC
outlet
−
⊕
−
Black
⊕
Red
Fuses
15 A
• Connecting to a vehicle battery
Grommet
_ black
12 V
battery
Supplied
DC power cable
Crimp
NOTE:
Use terminals for the
cable connections.
ID-1
+ red
WARNING!
NEVER
remove the
fuse holders.
⊕
−
red
black
12 V
Solder