Icom ID-1 Instruction Manual page 98

12
PRIORITY WATCH
D D Operating from the RC-24
qSelect VFO mode; then, set an operating frequency.
w Set the watch channel(s).
For memory channel watch:
Select the desired memory channel.
For call channel watch:
Select the desired call channel by clicking [CALL], then
click (left or right) on the [DIAL].
e Push [PRIO•
•7] to start the watch.
• " " blinks during priority watch
• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 89)
[PRIO• •7]
r Push [PRIO•
•7] again to stop the watch.
91
LOW