Working With Odbc Logs; Preparing To Use Odbc Logging - Cisco Servers User Manual

Chapter 9 Working with Logging and Reports

Working with ODBC Logs

Preparing to Use ODBC Logging

Step 1
Step 2
Step 3
78-13751-01, Version 3.0
This section contains procedures for the following topics:
• Preparing to Use ODBC Logging, page 9-25
Configuring a System Data Source Name for ODBC Logging, page 9-26
•
• Configuring a CSV Log, page 9-22
If you plan to use ODBC logging, there are several steps you must complete
before you configure an ODBC log.
To prepare to use ODBC logging, follow these steps:
Set up the relational database to which you want to export logging data. For more
information, refer to your relational database documentation.
Set up a system data source name (DSN) on the Cisco Secure ACS server. For
instructions, see the "Configuring a System Data Source Name for ODBC
Logging" section on page
Enable ODBC logging in the Cisco Secure ACS HTML interface:
In the navigation bar, click Interface Configuration.
a.
Click Advanced Options.
b.
c. Select the ODBC Logging check box.
Click Submit.
d.
Result: Cisco Secure ACS enables the ODBC logging feature. On the
Logging page, in the System Configuration section, Cisco Secure ACS
displays links for configuring ODBC logs.
Result: You can now configure individual ODBC logs. For instructions, see the
"Configuring an ODBC Log" section on page
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
9-26.
9-27.
Working with ODBC Logs
9-25