Setting Juniper Radius Parameters For A User - Cisco Servers User Manual

Chapter 7 Setting Up and Managing User Accounts

Setting Juniper RADIUS Parameters for a User

Note
Step 1
Step 2
Step 3
78-13751-01, Version 3.0
The Juniper RADIUS parameters appear only if all the following are true:
A AAA client has been configured to use RADIUS (Juniper) in Network
•
Configuration.
The Per-user TACACS+/RADIUS Attributes check box is selected under
•
Advanced Options in the Interface Configuration section.
User-level RADIUS (Juniper) attributes you intend to apply have been
•
enabled under RADIUS (Juniper) in the Interface Configuration section.
Juniper RADIUS represents only the Juniper proprietary attributes. You must
configure both the IETF RADIUS and Juniper RADIUS attributes. Proprietary
attributes override IETF attributes.
To hide or display Juniper RADIUS attributes, see the
Configuration Options for RADIUS (Juniper)" section on page
To configure and enable Juniper RADIUS attributes to be applied as an
authorization for the current user, follow these steps:
Perform Steps 1 through 3 of the
page 7-5.
Result: The User Setup Edit page opens. The username being added or edited
appears at the top of the page.
Before configuring Juniper RADIUS attributes, be sure your IETF RADIUS
attributes are configured properly. For more information about setting IETF
RADIUS attributes, see the
section on page 7-37.
In the Juniper RADIUS Attributes table, to specify the attributes that should be
authorized for the user, follow these steps:
Select the check box next to the particular attribute.
a.
Further define the authorization for that attribute in the box next to it.
b.
c. Continue to select and define attributes, as applicable.
For more information about attributes, see
Attributes," or your AAA client documentation.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
Advanced User Authentication Settings
"Adding a Basic User Account" section on
"Setting IETF RADIUS Parameters for a User"
Appendix D, "RADIUS
"Setting Protocol
3-19.
7-47