Cisco Servers User Manual page 172

Configuration-specific User Group Settings
•
•
•
•
•
•
•
RADIUS (Cisco Aironet) is not an option since there are no Cisco
Note
Aironet-specific VSAs. The length of user session timeouts is controlled by
IETF RADIUS attribute 27, Session-Timeout.
Note When a vendor-specific variety of RADIUS is configured for use by network
devices, the RADIUS (IETF) attributes are available because they are the base
set of attributes, used as the first 74 attributes for all RADIUS vendors.
The content of these subsections is dynamic and based on two factors as follows:
•
•
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
6-16
Configuring Ascend RADIUS Settings for a User Group, page 6-37
Configuring Cisco VPN 3000 Concentrator RADIUS Settings for a User
Group, page 6-38
Configuring Cisco VPN 5000 Concentrator RADIUS Settings for a User
Group, page 6-39
Configuring Microsoft RADIUS Settings for a User Group, page 6-41
Configuring Nortel RADIUS Settings for a User Group, page 6-42
Configuring Juniper RADIUS Settings for a User Group, page 6-44
Configuring Cisco BBSM RADIUS Settings for a User Group, page 6-45
For a particular protocol to be listed, a AAA client must be configured to
authenticate using that protocol. For more information, see the
Configuration" section on page
The specific attributes for a particular protocol must be configured for display
at the group level. For more information, see the
Options for TACACS+" section on page 3-7
Options for RADIUS" section on page
Chapter 6 Setting Up and Managing User Groups
4-8.
"Protocol Configuration
or the "Protocol Configuration
3-10.
"AAA Client
78-13751-01, Version 3.0