Action Codes - Cisco Servers User Manual

Appendix G ODBC Import Definitions

Action Codes

Action Codes for Setting and Deleting Values
78-13751-01, Version 3.0
You can use the MessageNo field (mnemonic: MN) to associate related
transactions, such as the addition of a user and subsequent actions to set password
values and status. You can use the MessageNo field to create an audit trail for the
third-party system that writes to the accountActions table.
This section provides the action codes valid for use in the Action field
(mnemonic: A) of your accountActions table. The Required column uses the field
mnemonic names to indicate which fields should be completed, except for the
mandatory fields, which are assumed. For more information about the mnemonic
names of accountActions table fields, see
information about the mandatory fields, see the
Mandatory Fields" section on page
If an action can be applied to either a user or group, "UN|GN" appears, using the
vertical bar to indicate that either one of the two fields is required. To make the
action affect only the user, leave the group name empty, and vice versa.
This section contains the following topics about action codes:
Action Codes for Setting and Deleting Values, page G-5
•
• Action Codes for Creating and Modifying User Accounts, page G-7
Action Codes for Initializing and Modifying Access Filters, page G-15
•
• Action Codes for Modifying TACACS+ and RADIUS Group and User
Settings, page G-20
• Action Codes for Modifying Network Configuration, page G-27
• Action Code for Deleting the CiscoSecure User Database, page G-31
The two most fundamental action codes are SET_VALUE (action code: 1) and
DELETE_VALUE (action code: 2), described in
The SET_VALUE (action code: 1) and DELETE_VALUE (action code: 2)
actions, described in Table G-2 on page
assign a value to various internal attributes in Cisco Secure ACS. Unless asked to
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
Table G-1 on page
"accountActions Table
G-3.
Table G-2 on page
G-6, instruct RDBMS Synchronization to
Action Codes
G-2. For more
G-6.
G-5