Pix Firewall System Requirements; Pix Firewall System Interoperability With Pdm - Cisco PIX 520 - PIX Firewall 520 Installation Manual

Installation guide
Hide thumbs Also See for PIX 520 - PIX Firewall 520:
Table of Contents

Advertisement

PIX Firewall System Requirements

PIX Firewall System Requirements
PDM Version 3.0 requires PIX Firewall software Version 6.3.
PDM has the following system requirements:
Caution
If you are using CSPM or PIXMC, use PDM for monitoring only. All changes made using PDM will be
overwritten the next time CSPM or PIXMC synchronizes with the PIX Firewall.
For more information on earlier versions of PDM, see the appropriate installation guide at:
http://www.cisco.com/en/US/products/sw/netmgtsw/ps2032/products_installation_guides_books_list.h
tml
This section includes the following topics:

PIX Firewall System Interoperability with PDM

Table 1-1
Table 1-1
Type
Hardware
Platform
Random access memory
Flash Memory
Software
PIX Firewall operating system
Encryption
The PIX Firewall system ships with PIX Firewall software Version 6.3, which includes a pre-installed
DES activation key. If your PIX Firewall is not enabled for DES, 3DES, or AES, and you are a registered
Cisco user, you can receive a DES, 3DES, or AES activation key by completing the form at the following
URL:
become a registered Cisco user, go to
Cisco PIX Device Manager Installation Guide
1-4
PDM Version 3.0 is available on all PIX 501, PIX 506/506E, PIX 515/515E, PIX 520, PIX 525, and
PIX 535 platforms running PIX Firewall software Version 6.3.
PDM works with any configuration, whether created with the PIX Firewall command-line interface
(CLI), Cisco Secure Policy Manager (CSPM) or Management Center for PIX Firewall (PIXMC).
However, subsequent configuration changes using CSPM or PIXMC overwrites the PDM
configuration.
PIX Firewall System Interoperability with PDM, page 4
Flash Memory Requirements, page 5
Maximum Configuration File Size, page 5
Software Requirements, page 6
Upgrading to a New Software Release, page 6
lists the PIX Firewall System requirements for PDM Version 3.0.
PIX Firewall System Requirements for PDM Version 3.0
http://www.cisco.com/cgi-bin/Software/FormManager/formgenerator.pl?pid=221&fid=324.
Description
PIX 501, 506/506(E), 515/515(E), 520, 525, or 535
16MB
See
Table 1-2
Version 6.3
DES, 3DES, or AES-enabled
http://tools.cisco.com/RPF/register/register.do
Chapter 1
Overview
To
78-15483-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pix device manager 3.0

Table of Contents