Cisco Servers User Manual page 495

Appendix B System Messages
Error Message
Error Message
Error Message
until the service is restarted
Error Message
78-13751-01, Version 3.0
– Starting Processing in Auth Module
Finishing Processing in Auth Module
–
Logging
–
Recommended Action No action required
Service name could not be restarted
CSMon has failed to restart the named CiscoSecure service.
Explanation
Recommended Action Manually start the applicable service from the command
line or choose Start > Settings > Control Panel and then click Services and
use the Services applet to start the applicable service
Service name has been restarted so monitoring will now continue
Explanation The named CiscoSecure service has been restarted via the
Windows NT/2000 Service Manager.
No action required.
Recommended Action
Service name has been stopped properly. Monitoring will suspend
Explanation The named CiscoSecure service was shut down via the
Windows NT/2000 Service Manager
Recommended Action No action required.
Service name in transition state for too long... giving up
Explanation CSMon waits only so long before giving up on a transitory
service.
No action required
Recommended Action
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
Windows NT/2000 Event Log Service Startup Errors
B-5