Assigning A Pix Acl To A User - Cisco Servers User Manual

Basic User Setup Options
Step 2
Step 3

Assigning a PIX ACL to a User

Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
7-22
Do one of the following:
Select the Never option to keep the user account always enabled.
a.
This is the default setting.
Note
Select the Disable account if option to disable the account under specific
b.
circumstances. Then, specify one or both of the circumstances under the
following boxes:
Date exceeds—Select the Date exceeds: check box. Then select the
•
month and type the date and year on which to disable the account.
The default is 30 days after the user is added.
Note
Failed attempts exceed—Select the Failed attempts exceed check box
•
and then type the number of consecutive unsuccessful login attempts to
allow before disabling the account.
The default is 5.
Note
Do one of the following:
a. If you are finished configuring the user account options, click Submit to
record the options.
b. To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
The Downloadable ACLs feature enables you to assign a PIX Access Control List
(ACL) at the user level. You must have established one or more PIX ACLs before
attempting to assign one. For instructions on how to configure a downloadable
Chapter 7 Setting Up and Managing User Accounts
78-13751-01, Version 3.0