Editing The Certificate Trust List; Adding A New Ca Certificate To Local Certificate Storage - Cisco Servers User Manual

Certification Authority Setup

Editing the Certificate Trust List

Step 1
Step 2
Step 3
Warning
Step 4
Tip
Step 5

Adding a New CA Certificate to Local Certificate Storage

Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
8-72
You use this procedure to add CAs to or remove CAs from your CTL.
To edit the CTL, follow these steps:
In the navigation bar, click System Configuration.
Click Certification Authority Setup.
Result: Cisco Secure ACS displays the CA Operations table.
To edit the certificate trust list, click Edit certificate trust list.
Result: The system displays the Edit the Certificate Trust List (CTL) table.
Adding a public CA that you do not control may reduce your system security.
For more information, see the
page 8-71.
To add a CA to your CTL, select corresponding check box.
You can select, or deselect, as many CAs as you want.
Click Submit.
Result: Cisco Secure ACS adds (or removes) the specified CA to (or from) the
CTL.
Use this procedure to add a new certificate to local certificate storage.
You must perform this procedure for the CA that issued your server certificate to
distinguish it from CAs trusted to issue user certification.
Chapter 8 Establishing Cisco Secure ACS System Configuration
"Trust Requirements and Models" section on
78-13751-01, Version 3.0