Action Codes For Setting And Deleting Values; Action Codes For Creating And Modifying User Accounts - Cisco Servers User Manual

Appendix G ODBC Import Definitions
Table G-2 Action Codes for Setting and Deleting Values (continued)
Action
Code Name
2 DELETE_
VALUE

Action Codes for Creating and Modifying User Accounts

Note
Table G-3 User Creation and Modification Action Codes
Action
Code Name
100 ADD_USER
101 DELETE_USER
102 SET_PAP_PASS
103 SET_CHAP_PASS
104 SET_OUTBOUND_
CHAP_PASS
78-13751-01, Version 3.0
Required
UN|GN, AI, VN
Table G-3 lists the action codes for creating, modifying, and deleting user
accounts.
Before you can modify a user account, such as assigning a password, you must
create the user account, either in the HTML interface or by using the
ADD_USER action (action code: 100).
Transactions using these codes affect the configuration displayed in the User
Setup section of the HTML interface. For more information about the User Setup
section, see Chapter 7, "Setting Up and Managing User Accounts."
Required
UN, V1
UN
UN, V1
UN, V1
UN, V1
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
Description
Delete value (VN) for app (AI) and user (UN).
Description
Create a user (32 characters maximum). V1 is used as
the initial password. Optionally, the user can also be
assigned to a group.
Remove a user.
Set the PAP password for a user (64 ASCII characters
maximum). CHAP/ARAP will also default to this.
Set the CHAP/ARAP password for a user (64
characters maximum).
Sets the CHAP/ARAP password for a user (32
characters maximum).
Action Codes
G-7