Enumeration Definition - Cisco Servers User Manual

Appendix E Cisco Secure ACS Command-Line Database Utility
Table E-9 Attribute Definition Keys (continued)
Keys Required
Enums No (only valid
when the
TYPE value is
INTEGER)

Enumeration Definition

78-13751-01, Version 3.0
Value Required Description
Enumerations The name of the enumeration section.
section name
Several attributes can reference the same enumeration
section. For more information, see the
Definition" section on page
For example, the following attribute definition section defines the
widget-encryption VSA, which is an integer used for authorization, and for which
enumerations exist in the Encryption-Types enumeration section:
[widget-encryption]
Type=INTEGER
Profile=OUT
Enums=Encryption-Types
Enumeration definitions enable you to associate a text-based name for each valid
numeric value of an integer-type attribute. In the Group Setup and User Setup
sections of the Cisco Secure ACS HTML interface, the text values you define
appear in lists associated with the attributes that use the enumerations.
Enumeration definition sections are required only if an attribute definition section
references them. Only attributes that are integer-type attributes can reference an
enumeration definition section.
The section header of each enumeration definition section must match the value
of an Enums key that references it. An enumeration definition section can be
referenced by more than one Enums key, thus allowing for reuse of common
enumeration definitions. An enumeration definition section can have up to 1000
keys.
Table E-10 on page E-36
section.
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
User-Defined RADIUS Vendors and VSA Sets
lists the valid keys for an enumeration definition
"Enumeration
E-35.
E-35