Cisco Servers User Manual page 557

Appendix E Cisco Secure ACS Command-Line Database Utility
Table E-5 ADD_NAS Statement Tokens (continued)
Token Required Value Required
VENDOR Yes
NDG No
SINGLE_CON No
KEEPALIVE No
78-13751-01, Version 3.0
Description
See Description The authentication protocol the AAA client uses. For
RADIUS, this includes the VSA. The valid values are
listed below. Quotation marks are required due to the
spaces in the protocol names.
"TACACS+ (Cisco IOS)"
"RADIUS (IETF)"
"RADIUS (Cisco IOS/PIX)"
"RADIUS (Ascend)"
"RADIUS (Cisco VPN 3000)"
"RADIUS (Cisco VPN 5000)"
"RADIUS (Cisco Aironet)"
"RADIUS (Cisco BBSM)"
"RADIUS (Nortel)"
"RADIUS (Juniper)"
NDG name The name of the Network Device Group to which the
AAA client is to be added.
Y or N For AAA clients using TACACS+ only, the value set
for this TOKEN specifies whether the Single Connect
TACACS+ AAA Client option is enabled. For more
information, see the
Client" section on page
Y or N For AAA clients using TACACS+ only, the value set
for this token specifies whether or not the Log
Update/Watchdog Packets from this Access Server
option is enabled. For more information, see the
"Adding and Configuring a AAA Client" section on
page
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
User and AAA Client Import Option
"Adding and Configuring a AAA
4-9.
4-9.
E-21