Tacacs+ Av Pairs - Cisco Servers User Manual

Cisco IOS Attribute-Value Pair Dictionary

TACACS+ AV Pairs

Note
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
C-2
Beginning with Cisco Secure ACS 2.3, some TACACS+ attributes no longer
appear on the Group Setup page. This is because IP pools and callback
supersede the following attributes:
addr
addr-pool
callback-dialstring
Additionally, these attributes cannot be set via database synchronization, and
ip:addr=n.n.n.n is not allowed as a Cisco vendor-specific attribute (VSA).
Cisco Secure ACS supports many TACACS+ AV pairs. For descriptions of these
attributes, refer to Cisco IOS documentation for the release of Cisco IOS running
on your AAA clients. TACACS+ AV Pairs supported in Cisco Secure ACS are as
follows:
acl=
•
• addr=
addr-pool=
•
autocmd=
•
• callback-dialstring
callback-line
•
• callback-rotary
cmd-arg=
•
cmd=
•
• dns-servers=
gw-password
•
• idletime=
• inacl#n
inacl=
•
• interface-config=
Appendix C TACACS+ Attribute-Value Pairs
78-13751-01, Version 3.0