Technical Data Ultramat 7 - Siemens SIPROCESS GA700 Operating Instructions Manual

Table 13-13 OXYMAT 7: Parts in contact with sample gases
Materials of wetted parts OXYMAT 7
Sample chamber
Gas path With hoses
With pipes
Sealing material
The high-temperature version of the analyzer module is not intended for installation in the rack-mounted device.
1)
13.3.2

Technical data ULTRAMAT 7

Table 13-14 ULTRAMAT 7: General technical specifications
General
Information on the smallest span
Max. power consumption
Weight (only module)
Electrical safety
Max. EMC error during operation with one
and/or two OXYMAT 7/ ULTRAMAT 7 units
The high-temperature version of the analyzer module is not intended for installation in the rack-mounted device.
1)
Rack-mounted device
Operating Instructions, A5E31874006-12
Stainless steel:
• Plates: Material No. 1.4571
• Screw-in glands: Material No. 1.4571
Hastelloy:
• Plates: Material No. 2.4602
• Screw-in glands: Material No. 2.4819
FPM
Stainless steel:
• Pipes: Material No. 1.4404
• Gas connections: Material No. 1.4571
Hastelloy:
• Pipes: Material No. 2.4602
• Gas connections: Material No. 2.4602
ULTRAMAT 7
≤ 30 W
Max. 5.2 kg
13.3 Technical specifications of analyzer modules
OXYMAT 7 high-temperature
Stainless steel:
• Plates: Material No. 1.4571
Hastelloy:
• Plates: Material No. 2.4602
-
Stainless steel:
• Gas connections: Material No. 1.4571
Hastelloy:
• Gas connections: Material No. 2.4602
FKM (e. g. Viton) or FFKM (Kalrez 6375)
See module nameplate
In accordance with DIN EN 61010-1
1.0% according to EN 61326-1 (2013)
Technical specifications
1)
ULTRAMAT 7 high-temperature
≤ 120 W
Max. 7.2 kg
1)
123